Dreame robot mower "LiDAR temperature is too high": what it means and the fix
Works for Dreame A2 and A3 AWD series (A3 AWD 1000, A3 AWD Pro 2500 and 3500).
What it means: The LiDAR sensor has reached 90 °C or more and has turned off to protect itself.
Quick fix: Move the robot somewhere shaded, cool and well ventilated.
Fix it in 2 steps
- Move the robot somewhere shaded, cool and well ventilated.Done?
- Run the robot only when the air is below 40 °C.Did it work?
Fixed when: The alarm stops once the temperature is normal.
Great, it is fixed. Bookmark this page in case it comes back.
Still showing LiDAR temperature is too high?
The message keeps coming back after a restart. Contact Dreame after-sales service through support.dreametech.com, or the [email protected] address in the manual, with your serial number and a photo or video of the problem. Contact Dreame support. Dreame support →
Parts that fix this
Other Dreame robot mower errors
The robot is not connected to the app›Robot lifted›Robot tilted›Robot trapped›Wheel error›Blade disc can't rotate›The blade disc fails to move up or down›The blade disc cannot move to the side›Bumper error›Charging errorCharging error›Battery temperature too high›Battery temperature is high›Battery temperature is low›LiDAR is blocked›LiDAR malfunction›LiDAR is dirty›LiDAR temperature is high›Robot is lost›The robot is in the no-go zone›The robot is outside the map›Emergency stop is activated›Low battery›The robot is away from the map. Risk of being stolen›Failed to return to the charging station›Failed to dock in the charging station›Positioning failed›Insufficient space for turning in front of the station›Path obstructed›There is an issue with the front camera›Boundary detection error occurs during Auto-Mapping›Abnormal vibration›All 35 Dreame robot mower codes →